Everything Your Mama Made - Get Moving Leggings and Zenith & Quasar Winter Weight Supplex

I have loved every pattern I have made from Everything Your Mama Made (EYMM), and this one is no exception. I've tried several "legging" or "tights" patterns and have not found one that I absolutely love. So I decided to give the EYMM "Get Moving" leggings a try. I do like this one - but it's not quite love - but it is so close!  But I think I can make some adjustments to my next pair to make it love.

The wonderful Lilly Himrod of Zenith & Quasar sent me some of her new winter weight supplex to try  out. I'm already in love with the regular supplex and was so excited to try the heavier winter weight. The fabric content is 45% Supplex Nylon, 42% Polyester, and 13%Lycra Spandex and weighs a whopping 280 GSM. It has the same stretching ability as the regular supplex 50% in every direction and is so soft. You can buy the supplex at www.zenithandquasar.com for $20/yard - and I can make a pair of legging from 1 yard.

I used the heathered navy for my leggings. Here are my pieces.

Here's an up close look at the heathered Navy Supplex.

The EYMM pattern has you sew the front and back seams first. I used my serger for this.

Since the seams were easy to get to - I decided to topstitch them with my coverstitch for reinforcement.

This is what the seam now looks like on the inside.

Then the pattern called for the inseam of the legs to be sewn. I also did this on my serger and I sewed from the crotch to the ankle of each leg. After sewing the legs - I was seriously wondering if they would fit. They looked so narrow.

Now for the waistband. First I sewed the ends together. I often cut my waistband perpendicular to the leggings so that it fits on the yard of fabric. Since this fabric has the same amount of stretch in every direction, it doesn't affect the fit and I like the contrast when it's sewn on.

I folded the band in half and attached it with my serger.

Then I used my coverstitch to topstitch the seam of the band. This also reinforces the seam.

Then I hemmed them using my coverstitch. I'm super short at only 5' tall and I could have taken about 3 inches off the bottom of the leggings.

Here I am in the leggings. I paired them with a solid navy Laundry Day Tee (Love Notions - Free Pattern), patterned infinity scarf and dark brown sherpa lined boots.

The rise on these is perfect! On my next pair, I may tak an inch off of the height, but really I like them to reach my belly button.

Again - the rise is perfect and creates a nice smooth front.

Although the legs were slimmer tan I like - they did fit. And as you can see in this photo there wasn't any pulling at the seams. However, I do think I'll make the legs about an inch wider on my next pair just so I don't feel quite so constricted.

So far, this is the best legging pattern I have tried and I will definitely be making more - just with a few minor tweaks.

Sweater Upcycle

I have a sweater that I just love how it fits, but last time I wore it I noticed a small hole in the sleeve. I've tried darning holes in  sweaters before and have never been happy with how they turn out - or they just end up opening back up. So I decided to take the sleeves off and replace them with knit sleeves.

Here is the sweater.

Here is the fabric I decided to use for the sleeves. This is a European organic cotton made by Kapynen and this print is called "Dodo". I purchased it from Emrose Fabrics - they are out o stock on this print. Jumping June Textiles still has it in stock.

First I cut the sleeve off that had the hole. I decided I would keep the cuffs and reuse them.

Here's the hole.

The sleeves had gathers at the top, but I really didn't want gathers in the new sleeves so I measured the top where the gathers were.

Then I laid the sleeve on my fabric and gathered the top of the sleeve to be about the width that I measured.

Here is the sleeve laid out on my fabric ready to cut.

I then cut both sleeves out and cut about 1/2 and inch from the holey sleeve to account for a seam allowance. I also added a little length to the sleeves. They were long enough, but my hands get cold at work and I like it when they cover my hands to my fingers.

Here is what the sleeves look like cut out.

Now to sew the inseam of the sleeves.

Now I pinned them to the body making sure the top part matched.

Then I serged them on and added the cuffs.

Here is the finished sweater.

I tried it on and it still fits great without the gathers in the sleeve. I'm so happy it turned out good. Now I can love my sweater longer.

Fawnette Fabrics - Fancy Cats!

I was so excited to get a chance to sew a strikeoff for Fawnette Fabrics. They are a new custom knit group and their first round had a really cute cat print. Then they ran a flash round of the cat print in different colors - I was boring and bought it in black & white and a grey version. Check out their website - http://fawnettefabrics.tictail.com/. They are out of stock on the cats - but take a look at how cute they are.

Now they are on Round 2 and have "Fancy Cats" and a matching stripe. The Fancy Cats are very whimsical and fun. Fawnette prints on a 95% cotton 5% spandex base fabric with a 220 gsm weight. It feels so soft and I love this weight - nice and thick.

I originally wanted to make the Hey June Aurora Tee with the fabric - but that pattern was a little too wide for the fabric I had. I noticed the pieces were extremely similar to an Anna Maria Horner (AMH) pattern I had - the Lemon Drop Tee. So I took it out and laid it on the fabric - and it was slightly narrower - just enough to work. So I decided to cut the bottom sides of the lemon drop tee to look like the aurora tee.

Here are all my pieces cut out.

Here is a close up of Fancy Cats. I love the wallpapered wall with cat portraits look.

First I sewed the side panels onto the front and back pieces.

Then I topstitched the seam on my coverstitch.

Close up view of my coverstitching.

When I was topstitching I notice a very small hole in the fabric and grabbed a scrap of fusible interfacing (I happened to have some black) and ironed a small piece to the back to keep the hole from getting bigger or being noticeable.

Then it was time to add the neck band. 

Then I topstitched it down with my trusty coverstitch.

Then I added the lower sleeve piece to the body (which had a cap/short sleeve already).

Then I sewed the side seams and hemmed the sleeves and the bottom.

Here I am in my shirt!

I even made a shirt for my cat with some scraps.

Me trying to show off the side panels - and the cute striped coordinate.

Featured Post

Sew it Yourself MLM company clothing

If haven't heard of MLM companies that sell clothes, I'm guessing you have seen it, but didn't know it. It seems to be EVERYWHER...